INVOptional
Voltage regulator
Protects the UPS input from long sags, overvoltage and an unstable utility.
UPS CONFIGURATOR
Protected power
sized for the real load
Define equipment, runtime and redundancy. The configurator calculates power, phases and battery modules, then matches compatible Virtek solutions.
NORMATIVE REFERENCES
Standards and frameworks
We consider applicable requirements when designing architecture, controls and test programmes.
IEC · 62040-1Standard · INT+
IEC 62040-1:2017 · UPS safety requirements
International reference for safe UPS design and use.
- Jurisdiction
- INT
- Reviewed
- 2026-08-27
IEC · 62040-3Standard · INT+
IEC 62040-3:2021 · UPS performance and test requirements
Reference for comparing declared performance and test scenarios.
- Jurisdiction
- INT
- Reviewed
- 2026-08-27
Use case
What needs protection
Load
Enter equipment consumption
Calculated load6,500 W
Including starting modes6,500 W
Engineering headroom · 25%8,125 W
Requirements
Define the power system
Selection logic
The controls are connected: changing criticality, topology or battery immediately updates phases, redundancy, runtime and matching solutions.
- Use caseServer rack
- CriticalityContinuous operation
- TopologyOnline double conversion
- Input / output phase1/1
- RedundancyParallel N+1 · spare UPS
- Battery typeVRLA · 15 min
AUXILIARY SYSTEMS
Extend the protected-power chain
Optional items. Select any one or several in any order; recommendations follow the active UPS scenario.
Current scenarioServer rack8,125 W · 1 / 1 · 3 UPS
ESPOptional
Generator
Extends backup beyond UPS batteries during long utility outages.
MANAGEDOptional
Rack PDU
Distributes, meters and remotely controls power within the rack.
Selection result
Compatible solutions
Required capacity8,125 W · 9,029 VAWorst-case load per UPS4,063 W
The rating is selected from calculated power, phases, runtime, form factor and support for the requested redundancy design.
Virtek Online
Virtek Online 6000
VTK-ON-6000
- Topology
- Online double conversion
- Input / output phase
- 1/1
- Required capacity
- 6,000 VA / 6,000 W
- Efficiency
- 96%
- Form factor
- Rack / tower · Tower
- Battery type
- VRLA · Lithium-ion
- ✓ Pure sine wave
- ✓ Monitoring interface
- ✓ Cold start
Solution scope
UPSVirtek Online 6000 × 3
Battery modules1 × 3
Maintenance bypassIncluded in estimate
Network monitoringIncluded in estimate
VIRTEK PROJECT
Project cart
Servers, UPS systems, workspaces and services in one engineering request…